Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 37 of 66
7)
Turn the knob to set the start time, then press the knob to confirm. The cursor will move back on the left of
Start
:
8)
Move the cursor to the left of
End h. m.
in order to set the end time (see warning at the bottom).
9)
Press the knob. The cursor will move on the right of the
End h. m.
:
10) Turn the knob to set the end hour, then press the knob to enter the settings and move back the cursor on the left of
End h.
m.
11) Select
Previous Menu
to go back to the program page (
Ö
10.1), then press the knob.
12) To confirm the entered settings, select
Confirm Changes
and press the knob (or, to quit the menu without changing the
previous setting, select
Ignore Changes
and press the knob). See the following warning.
Step 4 - when the value is shown as a percentage, this is related to a logarithmic scale. This means, for example, that by
setting “50” the actual forward power value will be about ¾ of the rated power level (about 1500W).
Steps 7 and 10 – the start and end time are in 24 hours format. In the over stated example it will start from 1:10 A.M. and will
end to 2:19 A.M.
,
Step 7 - the ending time (
End h.m
) must be subsequent to the starting one (
Start h.m
), otherwise the power saver
time will start at the ending time and will end at the starting hour.
,
Step 11 - The
Previous Menu
command doesn’t save any settings, so after it the
Confirm Changes
command must
be mandatorily used. For information about this command
Ö
7.3.
10.1.e
Set a new password
menu
The default password to access the
Set Function, Size
menu is
000000
. For a better security, it’s recommended to change it
as follows (see notes and warnings at the bottom).
1)
As explained on par.
10, after accessing
Set Function, Size
menu with the correct password, the display will show:
2)
To set a new password turn the knob. The following menu will be shown:
3) The
cursor
Λ
points the first digit of the password. Turn the knob to set the new value for this digit, then press the knob to
enter it and move the cursor
Λ
underneath the second digit:
