Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 35 of 66
•
Power Size
: power size according to the rated value of each model (
Ö
10.1.b)
•
Show timers
: time in normal operation, alarm or stand-by mode (
Ö
10.1.c)
•
Set power saver
: power saver time settings (
Ö
10.1.d)
For information about
Confirm Changes
and
Ignore Changes
commands
Ö
8.3.
10.1.a
Function
menu
This menu allows to set the equipment as MASTER (standalone single equipment) or SLAVE (working within a broadcasting
system). If the equipment is set as SLAVE, it will stay in stand-by mode until a proper signal will come from the DB25
REMOTE I/O
connector
[16].
,
The REMOTE I/O connector will be available only in the next version of Eagle 2000. If you set in SLAVE mode an
equipment not provided with such this connector, it won’t be able to properly work.
To set the equipment in MASTER or SLAVE mode.
1)
In the program page, ensure that the cursor
>
is on the left of
Function
(if not, turn the knob in order to move the cursor
>
this way.
2)
Press the knob repeatedly till reading MASTER or SLAVE according to your needs.
3)
Should you have other settings to do in the
Program Page
, directly skip to one of the following paragraphs. If not, go on
with the next step (see note at the bottom).
4)
To confirm the entered setting, select
Confirm Changes
and press the knob (or, to quit the menu without changing the
previous setting, select
Ignore Changes
and press the knob).
Step 3 - note that you are still inside the program page, so no operations are necessary to come back to it, but you haven’t still
stored the entered setting, so performing step 4 is mandatory.
If the equipment is used within a broadcasting system (set to
SLAVE
) and the other amplifier develops a fault, the working
equipment can be used alone by setting it as
MASTER
.
10.1.b
Power size
menu
This menu allows to set the power size according to the rated value of each model. This allows to use the same control board as
“universal” spare part for all the Eagle models (
Ö
note on par.
5.3).To do that:
1)
In the program page, ensure that the cursor
>
is on the left of
Function
(if not, turn the knob in order to move the cursor
>
this way.
2)
Press the knob repeatedly till reading the proper power size (2000 W for Eagle 2000).
3)
Should you have other settings to do in the program page, directly skip to one of the following paragraphs. If not, go on with
the next step (see note at the bottom).
4)
To confirm the entered setting, select
Confirm Changes
and press the knob (or, to quit the menu without changing the
previous setting, select
Ignore Changes
and press the knob).
Step 3 - note that you are still inside the program page, so no operations are necessary to come back to it, but you haven’t still
stored the entered setting.
