Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 29 of 66
9 M
ENU DESCRIPTION
9.1 Startup
page
When the equipment is turned on by means of the
POWER ON/OFF
switch
[14] located on the rear panel, the
STAND-BY
yellow
LED
[9] will glow and the equipment temporarily displays the startup page containing the following information:
•
QUARK EAGLE
: model of the equipment
•
Rev.1.06
: revision number
•
Function
: equipment working mode -
MASTER
(standalone single equipment mode) or
SLAVE
(controlled by an external
management unit within a broadcasting system)
•
Power Size
: rated output power (
Ö
10.1)
After some seconds, the display will switch to the working page (
Ö
following paragraph).
9.2
Working Page
The working page is the one displayed in normal operation and shows the most important information related to the amplifier. In fact,
inside the menu, after 4 minutes of inactivity (no actions on the knob), a timer automatically quits the menu restoring the working
page. These are the information displayed in it:
•
QUARK EAGLE rev.1.06
: model of the equipment and software revision
•
Forward Power
: forward power level
•
Reflected Power
: reflected power level
•
10 Sep 2010 12.04.42
: system date and time (see bottom note)
To access the main menu from the working page (
Ö
9.2), press the knob.
The display backlight has a three minutes timeout. To switch on the backlight turn the multifunction knob.
The system time is shown in 24-hour format.
9.3 Main
menu
As explained, the main menu is accessed by pressing the knob from the working page.
If necessary, to come back to the working page turn the knob clockwise to move the cursor
>
upward to the left of
Working Page
(the first option), then press the knob to come back to the working page.
The main menu is split in two pages:
•
Working Page
: leads back to the working page as over explained
