Eagle 2000 – 2kW FM Broadcasting Amplifier
User’s manual – Page 11 of 66
4 P
ARTS DESCRIPTION
4.1 Front
view
Please see the following images to spot and identify the equipment parts and gain confidence with them:
[1]
ON/STAND-BY button
– allows switching the equipment between the operating (ON) condition and the stand-by one. To get
the command working, keep this button pressed for at least two seconds.
[2]
Control panel
– allows the user to set device functions, and to view and set operating parameters. For further details
Ö
4.2.
[3]
Front ventilation grid –
allows the device to draw in the cooling air into the equipment.
[4]
Front handles
– they allow the user to easily carry the device.
[5]
R.F. monitor output
– BNC-type connector for sourcing the low level RF signal; this function is useful for connecting to
external measurement units. The signal attenuation is 50 dB.
RF MONITOR output does not guarantee an output level that is perfectly constant versus frequency. As such, it cannot be used
for precision spectrum measurements.
4.2 Control
panel
The control panel commands are the followings:
[6]
LCD (Liquid Crystal Display) –
this display, composed of 4 lines of 20 characters, shows the operation parameters and
functions selected through the multifunction knob.
[7]
Multifunction knob (digital encoder) –
it allows
the user to navigate through the command menu in various ways.
•
If turned – selects the various functions/operations for the device, or the parameter values to be set
•
If pressed (for a short time like a button) when inside the menu, it activates the currently selected option
6
7
8
10
9
4
5
ON/STAND-BY
1
3
2
4
