Quark-elec Manual
https://www.quark-elec.com
22 of 28
2018
V3
Disable Temperature alerts:
This command stops temperature
alerts being sent to the controllers.
The G031 will still
automatically initiate the corresponding relay once
Temperature range is exceeded. However the notifications
for temperature changes will be disabled.
Enable temperature alert:
this command enables temperature
alerts being sent to the controllers.
Disable alarm alert:
this command stops input alarm alerts being
sent to the controllers. This is very useful because for every alarm
input triggered. The G031 will send a text message to the
controllers notifying them of this.
The G031 will still
automatically initiate the corresponding relay once alarm
input is externally triggered. However the notifications will be
disabled.
Enable alarm alert:
command enables input alarm alerts being
sent to the controllers.
