Quark-elec Manual
https://www.quark-elec.com
17 of 28
2018
V3
11.1.Setup Main Controller SIM Number
The first page you will see when opening the app is the login page. Here you can set two different SIM
numbers (for 2 different G031 devices). Enter the telephone number of the SIM card that you inserted into the
G031 where it says ‘
Device 1
’ in the app. If you have 2 QK-G031 devices then you can enter the second SIM
card number where it says
‘Device 2’
. The app will save these numbers so you don’t have to keep entering
them.
Input the number of the SIM card which is inserted into the
G031into ‘
Device 1’
. All command SMS messages will be sent to
this number via the APP.
Check the tick box to the right of the number you would like to
control. Then press the ‘
login
’ button.
Once the SIM card number have been stored, the APP will reply
with a confirmation message
