![background image](http://html1.mh-extra.com/html/quantum/valueloader-lto-2/valueloader-lto-2_user-manual_4083084018.webp)
Chapter 2 Installation and Quick Start
Quick Start Guide
4
LTO-2 Half-Height Tape Drive User’s Guide
Quick Start Guide
2
Use the following quick-start instructions to get your tape drive up and
running as quickly as possible.
Internal LTO-2
Half-Height Tape
Drive Quick Start
2
Use the following procedure to install internal LTO-2 Half-Height Tape
Drive. Print this page and check each step as you complete it. If you need
more information about a step, turn to the section referenced in the step.
1
Unpack the contents of your drive package, and check for damaged items.
See
Unpacking and Inspection
.
2
Review the drive’s default settings and change them if necessary:
• SCSI ID: 6
• Terminator Power: Disabled
See
Configuring the Internal Tape Drive
on page 7.
3
Turn off your computer, remove its covers and power cable, and select a mounting
bay for the drive.
See
Mounting the Internal Tape Drive
on page 11.
4
Connect a SCSI interface cable to the drive.
See
Connecting a SCSI Cable
on page 13.
5
Terminate the SCSI bus if the internal tape drive is the last device on the SCSI bus.
See
Checking the SCSI Termination
on page 14.
6
Connect a serial cable, if connecting the tape drive to a tape library.
See
Connecting a Serial Cable for Tape Libraries
on page 14.
7
Connect a power cable to the drive.
See
Connecting a Power Cable
on page 15.
8
Replace the computer covers and power cable, turn on the computer, and verify
that the internal tape drive is operating properly.
9
Register your tape drive.
See
Registering Your Tape Drive
on page 15.
Summary of Contents for ValueLoader LTO-2
Page 8: ...Figures viii LTO 2 Half Height Tape Drive User s Guide...
Page 10: ...Tables x LTO 2 Half Height Tape Drive User s Guide...
Page 40: ...Chapter 3 Operation Drive Maintenance 26 LTO 2 Half Height Tape Drive User s Guide...
Page 48: ...Chapter 4 Theory Data Compression 34 LTO 2 Half Height Tape Drive User s Guide...