background image

 
 
 
 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When the green 25% indicator 

blinks

, Turbo 3 has shut down power 

and must be recharged. 
 
During charging, each green indicator blinks on as charge is returned to 
the battery.  When all four green indicators are steadily lit, charging is 
complete.  See Section 5 for more charging details. 
 
Turbo 3 powers two pieces of photo gear at the same time.  Socket 
covers keep rain and dirt out of one (or both) sockets when not being 
used. Socket “A” can be used only for 

Flash Cables

.  Socket “B” can 

be used for  

Camera

 or 

Flash Cables

, and for 

charging

.   

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Turbo 3 has a cable locking feature that works with newer Flash Cable 
models CKE2, CZ2, and CQ2.  Older cables may also be used without 
the locking feature.  Please see the tables in Section 8 for all cable 
models. 
 
Turbo 

Camera Cables

 and 

Flash Cables

 come in several styles, 

defined by their initial prefixes. 
 
C” series 

Flash Cables

 power flashes from any Turbo model.  

Examples are CK, CKE, CKE2, CM4, CV, CZ, CZ2, CQ2, CQ8, etc. 
They power flashes with high voltage, rapid recycling power.  Plug them 
into either “A” or “B” Turbo 3 socket and into your flash. The white LED 
panel indicator marked flash symbol will light. 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 

Summary of Contents for TURBO3













Reviews: