background image

 
 
 
 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.    Charging 

 
Charge at room temperature.  Charge the night before, or charge just 
before use to be assured of starting your assignment with 100% 
charge. 
 
Turbo 3 is supplied with a universal charger that works with an AC 
mains power from 100 to 240 VAC. 
An accessory universal charger kit TRU may be used to allow charging 
from Euro, UK, US, or Australia/NZ 100-240 VAC power outlet.  

voltage converter is not necessary

 

Be sure the AC mains socket is an uninterruptible line (not 
switched)

. Plug the charger into the 

B socket only.

  (Please note that 

the A socket will not accepted a charger). The charge indicator       will 
light when the charger is properly connected.  It is important not to 
interrupt the charging so that the computer fuel gauge remains 
accurate.  If the power is interrupted, the fuel gauge may read 
incorrectly for one charge cycle, but will correct itself on the next cycle. 
 
A full charge takes about 3.5 hours.  

Do not use any other type of 

charger and risk damage to the Turbo 3 and the charger! 

 
The fuel gauge indicates charging progress as shown in the diagram. 
 
25% charged          50% charged         75% charged        100% charged 
    

 

 

 

                   

 

 

 

                    

 

 

 

                

 

 

 

   

 
 

 = steady light    

 = blinking      

 = off 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 

Summary of Contents for TURBO3













Reviews: