![background image](http://html1.mh-extra.com/html/quantum/travan/travan_user-manual_770660018.webp)
Chapter 1 Introduction and Installation
Installing the Drive
6
Travan Portable USB Tape Drive User’s Guide
2
Select the
Hardware
tab
3
Click on the
Device Manager
button) to make sure that the
tape drive is listed.
Driver for Windows 2000
a
If you are running Windows 2000, after Windows finds the plug
and play device, the
Found New Hardware
wizard will open. Click
Next
.
b
Insert the Certance Resource CD, if not already inserted, into
your CD-ROM drive. If it autoruns, click the
Exit
button.
c
In "Install Hardware Device Drivers," select
Search for a suitable
driver for my device (recommended)
, then click
Next
.
d
In
Locate Device Drivers
check the
CD-ROM drives
box and
uncheck the other boxes. Click
Next
.
e
In
Driver Files Search Results
you should see:
Windows found a
driver for this device. ...\tw157.inf.
Click
Next
.
f
In
Completing the Found New Hardware Wizard
you should see
The wizard has finished installing the software for: USB tape drive
(QIC-157).
Click
Finish
.
g
Go into the Windows Device Manager (from the Control Panel,
double-click on
System
, then select the
Hardware
tab, then click
on the
Device Manager
button) to make sure that the tape drive is
listed.
8
Remove the Certance Resource CD from your CD-ROM drive and
insert the TapeWare CD
Follow the instructions to install TapeWare.
Congratulations!
Your new Travan Portaboe USB tape drive is now
ready to run a backup, see
chapter 2, Operation and Maintenance
. For
instructions on using your backup software, see the online manual that
came with the software.
Note:
If you have difficulties with the installation, see
chapter 3,
Troubleshooting
.