Procedure
Quantum Smart-1 6000-L/6000-XL Appliances Replacing SAN Cards | 12
Removing an Expansion SAN Card from the
Riser
1. If applicable, lift the expansion SAN card latch(es) out of the slot.
2. Hold the expansion SAN card by its edges, and pull the card until the card edge connector
disengages from the expansion SAN card connector on the riser.
Note - If you do not immediately install a replacement expansion SAN card when a SAN card fails,
leave the failed SAN card in place to ensure proper appliance cooling until the new SAN card is
installed.
