Chapter 3: System Specifications
Physical Specifications – Pallet
Scalar i6000 Planning Guide
57
Physical Specifications – Pallet
Pallet Specifications
The library control modules, expansion modules, and parking modules
are each shipped on the same type of specially designed pallet. For dual-
robot new installs or upgrades, the robots will be shipped inside the
module.
The pallet’s dimensions are listed in
Table 7 Pallet Dimensions –
Module Only
Physical Specifications – Library
This section contains the physical specifications for all possible library
configurations.
The maximum weight, distributed load, and point load figures provided
in the sections below were calculated using the heaviest configurations
for a given frame count. Where differences between Gen 1/Gen 2 or
single robotics/dual robotics exist, the heaviest number was used.
Note:
If the library is installed on a raised floor, the raised floor should
be stabilized to prevent any horizontal movement. The library
has four point loads each on the control and expansion
modules.
This section covers:
•
Height
Width
Length
87 in.
221.0 cm
42.5 in.
108.0 cm
48 in.
121.9 cm
Summary of Contents for Scalar i6000
Page 1: ...Planning Guide Quantum Scalar i6000 Library 6 66882 07 Rev A...
Page 6: ...Contents vi Scalar i6000 Planning Guide...
Page 54: ...Chapter 2 Description Encryption and Key Management Solutions 48 Scalar i6000 Planning Guide...
Page 92: ...Chapter 4 Site Preparations Additional Comments 86 Scalar i6000 Planning Guide...