Chapter 2: Description
Expansion Modules
14
Scalar i6000 Planning Guide
only to the right of the control module for all configurations and the
LPM is always to the left of the CM.
For Gen 2 dual-robot configurations that include HDEMs, the library’s
maximum configuration includes up to 14 HDEMs and a single standard
expansion module to serve as the right parking module. This is because
an HDEM cannot be used as a parking module.
For the i11 release, standard expansion modules in positions 9 through
16 are no longer restricted to storage-only. Now all standard expansion
modules can accommodate the following functional units:
•
•
•
•
•
•
on page 27 (optional)
•
on page 28 (drives are optional)
•
•
•
on page 32 (required only if drives are installed; if an
expansion module contains only cartridges, all power is derived
from the control module).
Summary of Contents for Scalar i6000
Page 1: ...Planning Guide Quantum Scalar i6000 Library 6 66882 07 Rev A...
Page 6: ...Contents vi Scalar i6000 Planning Guide...
Page 54: ...Chapter 2 Description Encryption and Key Management Solutions 48 Scalar i6000 Planning Guide...
Page 92: ...Chapter 4 Site Preparations Additional Comments 86 Scalar i6000 Planning Guide...