![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_planning-manual_3542287031.webp)
Chapter 2: Description
I/O Management Unit
Scalar i6000 Planning Guide
25
Fibre Channel I/O
Blades
There is a single Fibre Channel (FC) I/O blade type: 7404 that auto-
negotiates up to 4 Gbps. Each FC I/O blade has an embedded controller
that provides connectivity and features that enhance the performance
and reliability of tape operations. Each blade provides two host
communication ports and four connection ports to drives.
• Fibre Channel LTO-1, LTO-2, LTO-3, LTO-4, LTO-5, and LTO-6
drives can be connected to drive-aggregating Fibre Channel I/O
blades or directly attached to a host.
Note:
If library firmware is at level 630Q or later, DLT tape
drives are no longer supported.
• We recommend that you connect directly to the host FC to take
advantage of the maximum possible throughput.
Ethernet Expansion
Blades
The EEB provides the option for Ethernet connectivity to each HP LTO-5
or LTO-6 drive (for MCB-to-drive communication purposes only). The
EEB provides a control path to the drive for commands as well as
facilitates taking drive logs and downloading drive firmware. Each EEB
has 6 Ethernet ports to allow attachment to 6 HP LTO-5 or LTO-6 drives.
The EEB provides Ethernet connectivity to the library's internal Ethernet
only and should not be connected to an external Ethernet source.
Summary of Contents for Scalar i6000
Page 1: ...Planning Guide Quantum Scalar i6000 Library 6 66882 07 Rev A...
Page 6: ...Contents vi Scalar i6000 Planning Guide...
Page 54: ...Chapter 2 Description Encryption and Key Management Solutions 48 Scalar i6000 Planning Guide...
Page 92: ...Chapter 4 Site Preparations Additional Comments 86 Scalar i6000 Planning Guide...