Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
81-81792-01 A01
July 2007
6
TC2201 Upgrade Procedure
Installing the TC2201
Bridge
0
To install the TC2201 bridge:
1
Loosen the two PHILLIPS screws securing the blank off plate to the CPCI
card cage and expose the slot needed for the TC2201 installation.
2
With the SCSI ports located to your right as you face the back of the
library, slide the first TC2201 into the slot of the card cage (see
figure 4
).
Figure 4 Installing a
TC2201 Bridge
3
Gently press down on the TC2201 until the board is seated in the card
cage and the ejector latches lock in place (see
figure 5
).
Blank off plate
Screws
Card cage
TC2201
