Quantum Scalar 50 TC2201 iSCSI Bridge Upgrade Instructions
81-81792-01 A01
July 2007
Introduction
3
Introduction
0
The Quantum Scalar 50 automated tape libraries are controlled by a host
computer via a SCSI LVD bus using the SCSI-3 medium changer command
set.
The Quantum Scalar 50 allows for easy conversion from the SCSI host
interface to an iSCSI host interface. This document describes upgrading a
standard Scalar 50 library equipped with a SCSI host interface to an iSCSI
host interface using a TC2201 Upgrade kit.
TC2201 Bridge
Operation
0
Once a TC2201 bridge option is installed and tested, the library operates
exactly as a Scalar 50 with a SCSI host interface. Operation of the library via
the operator control panel (OCP) is unchanged.
Preparing for the TC2201 Installation
0
Before beginning the installation procedure, make sure that you have the
required upgrade kit and tools.
Required Upgrade Kits
0
The TC2201 installation requires the following upgrade kit for every two tape
drives in a Scalar 50 library (see
table 1
):
Table 1 TC2201 Upgrade
Kit PN PR-UU9WG-YF
Note:
All part numbers are subject to change without notice.
Qty
Description
1
TC2201 PWA
2
SCSI Cables
1
Ethernet cross-over cable
1
Terminator
1
Quantum Scalar 50 TC2201 Upgrade Instructions
