![background image](http://html2.mh-extra.com/html/quantum/px500-series/px500-series_release-note_3542290006.webp)
Release Notes
Document 5502252 Rev C
August 2008
6
Known Issues
Known Issues
0
This release of Scalar 50 and PX5xx (V51) firmware has the following known issues:
Change
Request
Number
Service
Request
Number
Description
Workaround
PCR 17460
When logging in through service telnet
port, the first login always fails.
This only occurs with some telnet clients. This
will be corrected in future releases of library
firmware.
PCR 18082
False power supply and power supply
fan critical events may be logged on
rare occasions.
This will be corrected in future releases of
library firmware.
PCR 19087
OCP/Remote Management Pages: A
method is needed to unlock the doors
when a host goes down leaving the
doors in a locked state.
Restart the backup application and unlock
resources. This is a usability change that will be
addressed in a future release.
PCR 19090
The number of event fields on the OCP
should match what the customer is able
to view (critical, warning, and
information).
This will be corrected in future releases of
library firmware.
PCR 19188
Remote Management Pages: The drive
firmware update does not refresh to the
new firmware version once the update
completes. It requires a power cycle to
update.
To display the correct drive firmware version
after an update on the Remote Management
Pages, the customer will need to power cycle
the library.
PCR 19242
Log Sense page 07 (Last N Error Events)
doesn’t work as reported in the
Software Interface Guide.
This will be corrected in future releases of
library firmware.
PCR 19853
The drive firmware update through the
Remote Management Pages sometimes
fails.
Try the procedure again, if it still fails use the
primary port connection to update drive
firmware.
PCR 19997
During a I/E column port operation, if
Release Magazine
is selected from OCP
and tapes are moved around, the library
can fail after the door closes and a re-
scan occurs.
If load ports are being accessed, do not attempt
to release the magazine. This will be corrected
in future releases of library firmware