![background image](http://html1.mh-extra.com/html/quantum/p3000-series/p3000-series_user-manual_3848086087.webp)
Chapter 5 Multi-Unit Commands
Configure Multi-Units (P2000/P3000)
Quantum|ATL P3000 Series User’s Guide
67
Figure 38 Multi-Unit
Screen
Configure Multi-Units (P2000/P3000)
5
The Configure Multi-Unit command allows you to set the
following:
•
Library Unit field
—sets whether the library is single, slave, or
master in the multi-unit configuration
•
Library Unit # field
—sets the number assigned to a particular
library in the multi-unit configuration. Libraries are numbered
left to right beginning with 0 and ending with 4
•
# of Libraries field
—sets the total number of libraries in the
multi-unit configuration
•
LUN Config field
—this option will always be set to Single LUN
To configure a Multi-Unit Library option:
1
In the Multi-Unit screen, press the Configure Multi-Unit
button.
The GUI displays the Configure: Multi-Unit screen (see
Multi-Unit
System
Off-line
Standby
Load Port
Operator
Service
Multi
Unit
Back
Forward
Home
O
Configure
Multi-Unit
Calibrate
All PTMs
Stop
About
Quantum|ATL
Summary of Contents for P3000 Series
