Quantum P3000 Series, User Manual

Page: 83 / 146

Chapter 4 Service Commands
Testing the Library
Quantum|ATL P3000 Series User’s Guide 63
The Test: SysTest Library screen is displayed (see figure 36 ).
Figure 36 Test:
Systest Library Screen
2
Select one of the following system test options:
• Swap Bins - test storage bins only
• Swap Drives - test drives only
3
Select all desired test options as follows:
• Random - swap cartridges at random
• Use Barcodes - read barcode as cartridges are swapped
• Continuous - repeat test until aborted
4
When you have selected the type of test and all test options,
press the Execute button.
A “Command In Progress” dialog box is displayed.
The system test continues until completed unless you press the
Abort button. If you pressed the Continuous button in step 3,
you must press the Abort button to stop the test.
Note:
The Continuous button must be de-selected to enter
“# of Runs”.
System
Off-line
Standby
Load Port
Back Forward
Home
S
Test: Systest Library
Select Execute
Use
Barcodes
9 0
7 8
5 6
3 4
1 2
Stop
Random
Swap
Bins
Swap
Drives
_
Continuous
# of Runs:
Service
Tapes
Operator
About
Quantum|ATL