Quantum P3000 Series, User Manual

Page: 115 / 146

Appendix B Relocating the Library
Crating the Library
Quantum|ATL P3000 Series User’s Guide 95
If you are moving the library within a facility, refer to Preparing
the Library for Operation on page 98.
To crate the library for a new site:
1
Prepare the shipping pallet for the library as shown in
figure 50 .
a
Attach the two ramp extensions to the pallet.
b
Place the wooden support bar underneath the ramp
extensions.
c
Verify that the left wooden bar is attached to the pallet.
2
Place the library on the pallet
a
Raise the library support feet.
b
With the help of at least one person, roll the library to a
position in front of the pallet ramp.
c
Roll the library onto the pallet.
3
Secure the library.
a
Place the shipping bag over the library, and secure it into
place.
b
Remove the ramp sections from the pallet and slide them
into the center section.
c
Insert the foam block around the bottom of the library and
the pallet.
d
Insert and attach the stop blocks underneath the library on
the right side.
e
Attach the wooden bar on the right side of the library.
f
Remove the wooden bar on the left side of the library.
Warning:
The library weighs approximately 1300 pounds (591
kg). Use at least two people to perform any steps that
involve lifting or guiding the library. Use safe
practices when lifting or guiding the library and
handling the ramp.