62-0125-01
FastStor Rack Mount Installation Instructions
15
3.
Mount the front of the left-hand inner slide rail (#15) to your FastStor at the front mounting-hole using a slotted, pan head
screw (# 3). Refer to the illustration below for the location of the front mounting-hole.
4.
Secure the rear of the left-hand inner slide rail (#15) to your FastStor at the rear mounting-hole using a slotted, pan head
screw (# 3) and a Kepnut. Reach inside the rear opening of your FastStor and install the Kepnut (#4) onto the screw (#3).
Refer to the exploded view in the following illustration for the location of the mounting-hole inside your FastStor.
Note:
be careful to not disturb the blue and brown wires that connect the AC input module to the power supply.
5.
Re-install the drive assembly and secure the rear panel with the seven screws removed previously.
6.
Return to section:
Installing Kit Components
earlier in this document.
Rear Mounting-Hole
15 Inner Rail
3 2 Places
Front
Mounting-Hole
3
4
