![background image](http://html1.mh-extra.com/html/quantum/dxi6701/dxi6701_installation-and-configuration-manual_770539045.webp)
Initial Configuration
43
DXi6701/DXi6702
Figure 30 VTL Wizard: Discover
Hosts
Step 5: Map Hosts
1
Enter information about the host access group (see
):
•
Group Name
- Enter a name for the group.
•
Partition
- Select the partition to associate with the group.
•
Remote Host
- Select the host (initiator) to associate with the group.
•
Target
- Select the target (port) to associate with the group.
The
Backpanel Locations
section displays a graphical representation of the
Fibre Channel and Ethernet ports as they appear on the rear of the system. A
dark border displays around the currently selected target.
2
(Optional) Select the
Use CCL
check box to use the Command and Control LUN.
Note:
The CCL (Command and Control LUN) is not used in most environments.
This option is recommended for host access groups that contain an HP-UX
host. It can also be used if hosts that are not assigned to any host access
group exist in the SAN. The CCL is accessible to hosts only through LUN 0.
Caution:
If you are not sure if you should use CCL, contact Quantum Customer
Support before you enable this option.
3
Click
Add
.
4
(Optional) To map additional hosts, repeat Steps 1–3.
5
Click
Next
to continue.