Quantum ACL 4/52, Operator'S Manual

Page: 57 / 68

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
ACL 4/52 Operator’s Guide 41
3 Press the SELECT button to choose the Diagnostics menu and
verify the following is displayed in the SDA:
4 Press the
↓
button five (5) times to bypass the Home All , Selftest
All
,
Status Actuator
,
Status Sensor
and
Move Actuator
sub-menus.
Then verify the following is displayed in the SDA:
5 With
Inventory
displayed on line #2, press the
SELECT
button.
Note: With a full library, the inventory will take less than three
minutes if all of the cartridges are properly bar code labeled.
The actual inventory time can take longer if the library is not
completely full or if any of the cartridges are not properly
labeled. When the library is full of unlabeled cartridges the
inventory will take over twenty-seven minutes.
6 When the SDA returns to the previous menu as shown below (i.e.,
inventory is complete), exit the menu mode.
M e n u : D i a g n o s t i c s
H o m e A l l
M e n u : D i a g n o s t i c s
I n v e n t o r y
M e n u : I n v e n t o r y
S u c c e s s