Quantum ACL 4/52, Operator'S Manual

Page: 51 / 68

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
ACL 4/52 Operator’s Guide 35
5 With Retries displayed on line #2 of the SDA, press the SELECT
button and verify the following is displayed in the SDA:
Note: Retries Enabled is the default. If you want to disable this feature,
proceed to step 6. Otherwise, exit the menu mode.
6 Use the
↓
button to bypass the
Enabled
option and verify the
following is displayed in the SDA:
7 With the desired option displayed on line #2, press the
SELECT
button.
8 Exit the menu mode.
Enabling/Disabling the
Auto Load Feature
2
To enable or disable the auto load feature:
1 Enter the menu mode.
2 Press the SELECT button to choose the Configuration menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the
Inquiry, SCSI Address
,
Power-Up
State , Number of Drives, Auto Clean, and Retries menus and
verify the following is displayed in the SDA:
5 With Auto Load displayed on line #2 of the SDA, press the SELECT
button and verify the following is displayed in the SDA:
Note: Auto Load Disabled is the default. If you want to enable this feature,
proceed to step 6. Otherwise, exit the menu mode.
M e n u : R e t r i e s
E n a b l e d <
M e n u : R e t r i e s
D i s a b l e d
M e n u : C o n f i g u r a t i
I n q u i r y
M e n u : C o n f i g u r a t i
A u t o L o a d
M e n u : A u t o L o a d
D i s a b l e d <