Quantum ACL 4/52, Operator'S Manual

Page: 54 / 68

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
38 ACL 4/52 Operator’s Guide
2 Use the
↓
button to bypass the Configuration menu and verify the
following is displayed in the SDA:
3 Press the SELECT button to choose the Drive Control menu.
4 Verify the following is displayed in the SDA:
5 Press the SELECT button to choose the Unload sub-menu and
verify the following is displayed in the SDA:
6 Use the
↑
and
↓
buttons to navigate to the proper drive number.
Drive 0
= Top Drive
Drive 1 = Second Drive
Drive 2
= Third Drive
Drive 3 = Bottom Drive
7 With the proper drive number displayed on line #2, press the
SELECT
button and verify the following is displayed in the SDA:
Where “n” = the number of the drive that you selected.
8 When the following is displayed in the SDA, exit the menu mode.
Cleaning a Drive
2
To clean a drive:
1 Enter the menu mode.
2 Use the
↓
button to bypass the
Configuration
menu and verify the
following is displayed in the SDA:
3 Press the
SELECT
button to choose the
Drive Control
menu.
M e n u :
D r i v e C o n t r o l
M e n u : D r i v e C o n t r
U n l o a d
M e n u : U n l o a d
D r i v e 1
M e n u : D r i v e n
. . W o r k i n g . .
M e n u : U n l o a d
D r i v e n
M e n u :
D r i v e C o n t r o l