980 User Guide
– HDMI HDCP 2.2 Compliance
Rev. A2
Page 81
October 15, 2014
5
HDMI HDCP 2.2 Sink Compliance Tests
This chapter describes how to use the
optional
HDMI HDCP 2.2 sink compliance test feature of the 980 HDMI
Protocol Analyzer module. Please note you will have to purchase the HDMI HDCP 2.2 Sink Compliance Test
option in order to run these tests.
Note
: You can now select addition formats for testing on an individual test basis. This enables you to run a
particular source test on a format or formats that are not specified in the CTS.
The 980 supports the following test sections in the HDMI HDCP 2.2 Compliance Test specification:
Receiver Upstream w/Transmitter
2C-01: Regular Procedure
– With Transmitter.
2C-02: Irregular Procedure
– New Authentication after AKE init.
2C-03: Irregular Procedure
– New Authentication during Locality Check.
2C-04: Irregular Procedure
– New Authentication after SKE Send EKs.
2C-05: Irregular Procedure
– New Authentication during Link Synchronization.
5.1
Workflow for running the HDMI HDCP 2.2 Sink Compliance Tests
The following is the high level workflow for running the HDMI HDCP 2.2 Sink Compliance Tests. This workflow
assumes that you have powered up the 980 and established an Ethernet session with the 980 as described in
Connection for 980 GUI Manager and 980
.
The following is the high level workflow for running the HDMI HDCP 2.2 Sink Compliance Tests.
1. Connect the sink device under test to the 980 HDMI Protocol Analyzer Rx port via HDMI.
2. Complete a (or load an existing) Capabilities Declaration Form (CDF) for the device under test using the
CDF
Entry
panel.
3. Select the tests that you wish to run from the
Test Selection
panel.
4. Initiate the tests through the
Test Options / Review
panel.
5. View the detailed data for test failures if failures occur.
6. View the results in the
Test Results
panel under the
Navigator
panel.
5.2
Making the HDMI connections
This procedure describes how to establish an HDMI connection between the HDMI sink device under test and the
980. This procedure assumes that you have assembled the 980 and sink device under test and applied power to all
these devices. Refer to the procedures and diagram below.
Summary of Contents for 980
