Quantum 980, User Manual, Page: 45 / 116

980 User Guide
– HDMI HDCP 2.2 Compliance
Rev. A2
Page 45 October 15, 2014
3.10 Selecting the 1B series tests
Use the following procedures to select the 1B series tests to run. There are multiple tabs which correspond to each
section in the CTS.
To select the tests to run:
1. Select the Test Selection panel as shown below.
2. If you have an existing Test Selection option file saved you can recall that for use in your testing. Simply click
on the Open activation button.
A dialog box will appear as follows. Simply select the file and click on the OK activation button.