Quantum 980, User Manual, Page: 73 / 116

980 User Guide
– HDMI HDCP 2.2 Compliance
Rev. A2
Page 73 October 15, 2014
4 Exporting Compliance Test Results Files to a PC
The 980 HDMI Protocol Analyzer offers portability of data. You can disseminate compliance tests to other locations
for analysis by other colleagues.
If you ran the HDCP compliance tests from the embedded GUI you will have to transfer these compliance test files
to your PC if you want to disseminate them to others. You can transfer the files from the 980 HDMI Protocol
Analyzer module to your host PC in three ways: 1) Data Transfer GUI utility, 2) USB drive, 3) command line FTP.
Only the export method involving Data Transfer Utility will be described in the following.
4.1 Transferring Compliance Test Files using the Data Transfer Utility
You can transfer files easily using the 980 GUI Manager’s
Data Transfer utility. If you have ran the compliance test
through the embedded 980 GUI Manager then you will first have to transfer the compliance test results file from the
980 test instrument to you host PC. The procedure is the same whether you are transferring the results of the
Transmitter test or the Receiver test. This procedure uses the HDCP 2.2 Receiver tests. Follow the procedures
below.
To transfer Compliance Test files from the 980 Protocol Analyzer module to your PC using the Data
Transfer utility:
1. Through the external 980 GUI Manager, access the Compliance tab on the Navigator. Refer to the screen
shots below.