15. RL Remote – Linked to Local Qflash
Operation
Light output of this flash will
equal the light output of the
Local Qflash.
Using the Radio
The internal radio will default to receive (Rx) mode. You may still need
to select the proper channel to match the channel set on the local flash.
See section 8.0 for setting the channel and zones on the Trio.
The local flash may be :
1. A Trio in any mode, the radio of the local Trio must be set to
LINK
or
QTTL
.
2. A Qflash 5d-R in any mode with an FW9T or FW10w. The TTL
feature / switch must be turned on, see your FW instructions for turning
the TTL feature on.
3. A QTTL adapter with an FW9T, with the TTL switch turned on. In this
case the remote Trio is linked directly to the camera.
15.1 Remote – Linked to Local Qflash soft keys
To change the function of the soft keys use the
Left (-)
Å
and
Right (+)
Æ
buttons when no selection or setting is highlighted on the display.
Both the default and radio zones soft key functions are available
29
MODE
/OK
SET
R
EMOTE –
L
INKED
TO LOCAL
Q
FLASH
FIRE OPT SAVE RADIO
FIRE OPT SAVE RADIO
1 ON 2 ON 3 OFF 4 OFF
(DEFAULT)
(RADIO ZONES)
+
-
RL
