13. QR QTTL Ratio Mode Operation
F/number, ISO are sent to the
flash from the camera.
Independent fill flash ratios can
be set on the Local (on-camera)
flash and Remote Groups 1
and 2
Pressing the
Set
button will
highlight them in that order. Use
the
left (-)
Å
and
right (+)
Æ
arrow buttons to adjust the highlighted setting down or up.
When you Press the
Set
button, an
ON/OFF
soft key will appear on the
right of the display. You can use this soft key to prevent the Local, R1 or
R2 flashes from firing.
To prevent a Qflash from firing, press the
Set
button until the flash you
want to turn off is highlighted. Then press the
OFF
soft key, the word
“OFF” will appear next to that flash.
Using the Radio
Radio will default to QTTL mode. TTL ratio information will be sent to the
remote Qflash / Trio. You may still need to select the proper channel to
match the channel on the remote flashes. See section 8.0 for setting the
Channel on the Trio.
The remote Qflashes may be :
1. A Trio set to
RG
mode, Remote Group R1 or Remote Group R2.
2. A Qflash model 5d-R with a FW7Q or FW8R or FW10w, set to either
Wireless Remote Group R1 or Wireless Remote Group R2.
13.1 QTTL Ratio mode soft keys
Only the default soft key functions are available
26
MODE
/OK
SET
Q
TTLWR F
ILL
+0
F
5.6
7
R1 +1
ISO
200
R2 -1
FIRE OPT SAVE RADIO
FIRE OPT SAVE RADIO
(DEFAULT)
+
-
QR
