Quantifi Photonics IQTX 1100 Series User Manual Download Page 9 | Manualshive

Page: 9 / 75

Quantifi Photonics IQTX 1100 Series User Manual Download Page 9

Coherent Modulation Transmitter | IQTX

Quantifi Photonics Ltd.

Version

1.04

9

3

Introducing the IQTX

The IQTX enables quick and simple generation of phase modulated optical signals in one, simple to use,
bench-top package.

The IQTX is available in two configurations - single-polarization with dual-polarization emulator

and full

dual-polarization, allowing the customer flexibility from the outset. Its high bandwidth of up to 40 GHz
(typical) ensures high quality optical signal generation, even at Baud rates exceeding 80 Gbaud, making

it the ideal 'Golden' optical signal source for coherent communications applications. It uses the highest
quality, high bandwidth, linear RF amplifiers to enable generation of any multi-level optical modulation

formats when used with an RF Arbitrary Waveform Generator (AWG).

IQTX

’s emulated dual

-polarization capability uses optical multiplexing technique to generate a dual-

polarization signal from a single-polarization modulated signal. It enables the use of only two channels
of RF signal source to generate a dual-polarization coherent modulation format, leading to a significant
system cost reduction. This approach is widely used in R&D environments where there is no need to

have independent data pattern on all four tributaries.

The IQTX comes with a narrow linewidth, high-power, tunable internal laser, which can conveniently be

controlled using the touchscreen LCD or remotely from a PC using the web-based software interface.

The internal laser is externally connectorized on the front panel for maximum flexibility. Users simply

connect its output to the modulator input using a short PMF patch cord supplied with the instrument.

This external connection allows you to use your own laser if preferred.

IQTX 1100 Series overview & features

Front panel

1

Power On / Off

2

Built-in laser output PM FC/PM

3

Modulator laser input PM FC/PC

4

Dual-Pol emulator input PM

5

Modulated single-Pol signal output PM

6

Dual-Pol emulator input PM

7

Dual-Pol emulator output PM

8

RF signal In-Phase input

9

RF signal Quadrature input

10

LCD screen

11

Connector type information

Rear panel

12

USB connection to PC

13

Ventilation fans (DO NOT OBSTRUCT)

14

Ethernet port

15

Chassis grounding screw

16

Mains power on / off isolation switch

17

AC power ~100 - 240 V; 50/60 Hz;
70 W Max

«
...
7
8
9
10
11
...
»

Summary of Contents for IQTX 1100 Series












































































Reviews:

No comments