UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 780/970
11.2.3.1.2.
Configuring ARP Table
You can use this panel to change the configuration parameters for the Address Resolution
Protocol Table. You can also use this screen to display the contents of the table.
Configurable Data
Age Time (secs)- Enter the value you want the switch to use for the ARP entry ageout
time. You must enter a valid integer, which represents the number of seconds it will take
for an ARP entry to age out. The range for this field is 15 to 21600 seconds. The default
value for Age Time is 1200 seconds.
Response Time (secs) - Enter the value you want the switch to use for the ARP
response timeout. You must enter a valid integer, which represents the number of
seconds the switch will wait for a response to an ARP request. The range for this field is 1
to 10 seconds. The default value for Response Time is 1 second.
Retries - Enter an integer which specifies the maximum number of times an ARP request
will be retried. The range for this field is 0 to 10. The default value for Retries is 4.
Cache Size - Enter an integer which specifies the maximum number of entries for the
ARP cache. The range for this field is 256 to 3200. The default value for Cache Size is
3200.
Dynamic Renew - This controls whether the ARP component automatically attempts to
renew ARP Entries of type Dynamic when they age out. The default setting is Enable.
Remove from Table - Allows the user to remove certain entries from the ARP Table. The
choices listed specify the type of ARP Entry to be deleted:
All Dynamic Entries
All Dynamic and Gateway Entries
Specific Dynamic/Gateway Entry - Selecting this allows the user to specify the
required IP Address
Specific Static Entry - Selecting this allows the user to specify the required IP
Address
Specific Interface - Selecting this allows the user to specify the required interface
None - Selected if the user does not want to delete any entry from the ARP Table
