UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 717/970
11.2.2.10.1.
Viewing GARP Information Page
This screen shows the GARP Status for the switch and for the individual ports. Note that the
timers are only relevant when the status for a port shows as enabled.
Non-Configurable Data
Switch GVRP - Indicates whether the GARP VLAN Registration Protocol administrative
mode for this switch is enabled or disabled. The factory default is disabled.
Switch GMRP - Indicates whether the GARP Multicast Registration Protocol
administrative mode for this switch, enabled or disabled. The factory default is disabled.
Slot/Port - Slot/Port of the interface.
Port GVRP Mode - Indicates whether the GVRP administrative mode for the port is
enabled or disabled. The factory default is disabled.
Port GMRP Mode - Indicates whether the GMRP administrative mode for the port is
enabled or disabled. The factory default is disabled.
Join Time (centiseconds) - Specifies the time between the transmission of GARP PDUs
registering (or re-registering) membership for a VLAN or multicast group in centiseconds.
An instance of this timer exists for each GARP participant for each port. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds
(0.2 seconds).
Leave Time (centiseconds) - Specifies the time to wait after receiving an unregister
request for a VLAN or multicast group before deleting the associated entry, in
centiseconds. This allows time for another station to assert registration for the same
attribute in order to maintain uninterrupted service. An instance of this timer exists for each
GARP participant for each port. Permissible values are 20 to 600 centiseconds (0.2 to 6.0
seconds). The factory default is 60 centiseconds (0.6 seconds).
Leave All Time (centiseconds) -This Leave All Time controls how frequently LeaveAll
PDUs are generated. A LeaveAll PDU indicates that all registrations will shortly be
deregistered. Participants will need to rejoin in order to maintain registration. An instance
of this timer exists for each GARP participant for each port. The Leave All Period Timer is
set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible
values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds).
