UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1
Page: 728/970
Command Buttons
Refresh - Refresh the database and display it again starting with the first entry in the table.
11.2.2.12 Managing IGMP Snooping Querier
11.2.2.12.1.
Configuring IGMP Snooping Querier Configuration Page
Use this menu to configure the parameters for IGMP Snooping Querier, Note that only a user
with Read/Write access privileges may change the data on this screen.
Configurable Data
Snooping Querier Admin Mode - Select the administrative mode for IGMP Snooping for
the switch from the pulldown menu. The default is disable.
Snooping Querier Address - Specify the Snooping Querier Address to be used as
source address in periodic IGMP queries. This address is used when no address is
configured on the VLAN on which query is being sent.
IGMP Version - Specify the IGMP protocol version used in periodic IGMP queries. IGMP
queries.
Query Interval - Specify the time interval in seconds between periodic queries sent by
the snooping querier. The Query Interval must be a value in the range of 1 and 1800. The
default value is 60.
Querier Expiry Interval - Specify the time interval in seconds after which the last querier
information is removed. The Querier Expiry Interval must be a value in the range of 60
and 300. The default value is 60.
Command Buttons
Submit - Update the switch with the configured values.
Refresh - Reload the information on the page.
