Chapter 3
39
KEMF-4010 User’s
Figure 11 DIMM Memory and 240-pin Socket
Installing a DIMM
Carefully follow the steps below in order to install the DIMMs:
To avoid generating static electricity and damaging the DIMM, ground yourself by
touching a grounded metal surface or using a ground strap before you touch the DIMM.
1. Do not touch the connectors of the DIMM. Dirt or other residue may cause a
malfunction.
2. Hold the DIMM with its notch aligned with the memory socket of the KEMF-4010 and
insert it completely into the socket. Lift the locking tabs at each end of the DIMM
socket to lock it in position.
3. If you install two DIMMs, install the second DIMM using the same procedure as
above.
4. If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try
again.
5. Make sure the DIMM is properly installed and locked by the tabs on both sides of the
socket.
Figure 12 Memory Installation
