Chapter 3
40
KEMF-4010 User’s
Removing a DIMM:
To remove the DIMM, use your fingers or a small screwdriver to carefully push away the
plastic tabs that secure the DIMM at each end. Lift it out of the socket.
NOTE
Make sure you store the DIMM in an anti-static bag. The socket must be populated with
memory modules of the same size and manufacturer.
Expansive Interfaces
The board comes with one PCIex16 slot, two PCIex1 slot, one PCI slot, one Mini-PCIe
and Compact Flash Type II interfaces.
1x PCIe x16 slot
** When HDMI is occupied, this slot will support PCIe x8 only. **
2x PCIe x1 slots
1x PCI slot
1x Mini PCIe socket
CF Type II Connector
(on the back side of board)
Figure 13 Expansive Interfaces
NOTE
When adding or removing expansion cards, make sure that you unplug the power supply first.
Meanwhile, read the documentation for the expansion card to configure any necessary hardware
or software settings for the expansion card, such as jumpers, switches or BIOS configuration.
