Chapter 3
38
KEMF-4010 User’s
5. Turn the cam handle from the left side to the right side to lock into place. (Refer to
your CPU cooler installation manual for instructions on installing the cooler.)
Figure 9 Lock the CPU cooler
6. Attach the power connector of the CPU cooler to the CPU fan header on the
motherboard.
Figure 10 Attach the CPU fan power connector
CAUTION
Use extreme care when removing the CPU cooler because the thermal grease/tape between the
CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may
damage the CPU.
Memory Module Installation
Figure below displays the notch marks as they should look on your DIMM memory
modules. DDR2 DIMMs have 240-pins and one notch that will match with the onboard
DIMM sockets. DIMM modules are installed by placing the chip firmly into the socket at a
90-degree angle and pressing straight down until it fits tightly into the DIMM socket.
