SOFTPRO INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
14
.
c)
Insert the brine well with float into the
large hole on the grid plate (round or
rectangle).
d)
Connect the brine line to the float in the
brine well cylinder.
i.
Run the brine line tubing through the
small hole near top of the brine tank.
ii.
Attach the plastic nut and insert the
plastic sleeve into the tubing end.
iii.
Only hand tighten the brine line nut
to the float assembly.
STEP 2)
Setup the optional Whole House Filter.
(*If not
purchased, skip to the next step.)
ATTENTION:
The Whole House Carbon Filter is
pre-loaded with carbon media.
a)
Install the neoprene jacket
Wrap the black neoprene
jacket around the carbon
filter tank. Zip it up and pull
the bottom of the jacket
down to remove wrinkles.
b)
Remove the protective cap
from the top of the carbon filter tank
c)
Install the upper basket to the up-flow
head.
The brine tank setup is complete.
OPTIONAL WHOLE HOUSE FILTER SETUP