background image

HEAVIER USE

 BOTTLED W

ATER DISPENSER

Quick Start Guide

#601213

WINSTON-SALEM, NC 27101 

866-429-7566

 

WWW.PRIMOWATER.COM 

© 2016 Primo Water Corporation

QUICK START GUIDE

Place the dispenser on the 

floor in the desired location 

in your home. If the surface is 

uneven, rotate the back feet 

to level out the dispenser.

Clean probe with a damp 

cloth and dish soap. (Visit 

www.primowater.com for 

detailed cleaning instructions.) 

Place probe assembly on hanger 

inside door to keep it clean.

Slide drip tray into place.

Grab a bottle of Primo

®

 

water and fully remove the cap. 

Insert probe assembly into 

bottle. Press firmly to secure 

assembly over bottle opening. 

For 3 and 4-gallon bottles, 

squeeze the tabs on the top of 

the probe assembly to separate 

the probe cap from the collar and 

press the collar securely over the 

bottle opening.

Slide bottle inside the 

cabinet and close cabinet door.

Plug dispenser into 

a ground fault circuit 

interrupting (GFCI) outlet. 

You will hear the dispenser 

begin to pump water to 

fill the internal hot and 

cold tanks. 

Turn on desired functions 

by flipping the switches on the 

back of the dispenser to the 

ON position.

Blue – nightlight

Green – chills water 

Red – heats water

Once the dispenser has 

stopped filling the internal 

tanks, dispense and dispose at 

least 1 quart (approximately 

2 pint glasses) of water.

Your water will be ready 

to dispense fully chilled in 

approximately 1 hour or 

piping hot in approximately 

12 minutes.

10 

Register your dispenser

at 

www.primowater.com

 

to 

activate your warranty. 

Inside of door

1

QT

HR

ON

OFF

ON

OFF

ON

OFF

12 

MIN

®

®

®

Gallon

Gallon

Reviews: