SOFTPRO INSTALLATION GUIDE
©2020 Quality Water Treatment. All rights reserved.
25
.
2.
Select
DOWN
arrow to select Hardness
setting
3.
Press
SET
to input your water hardness. Input
the water hardness in grains per gallon
(GPG)* units.
*If your water hardness is in mg/L or PPM
units, divide that number by 17.1 to convert
to GPG units (round up to the nearest number
if needed).
Notes on Iron Removal Application*: (
If NOT
using an iron filter, please see the following.)
If using your water softener to additionally
remove iron from your water, then add 3
GPG’s to your total water hardness when
entering in the hardness setting.
*This is only applicable for iron levels equal to
2-3 ml/L or PPM.
4.
Press
SET
to select each field
5.
Use
UP
and
DOWN
arrows to select the
appropriate hardness (GPG) levels.
6.
Press
SET
to complete the setting
7.
Press
MENU
to return to the home screen.
SET REFILL RATE
1.
Press
MENU
to return to home screen
