Model Q10
Installation, Operation and Maintenance
Page
2
Rev. 10/22/08
Q10-IOM-Q
.doc
G
ENERAL
S
PECIFICATIONS
See Figure 1
Q10
A
Rise Height (Screw Pads Highest Position)
78 3/4" (2000mm)
B
Overall Height (Adjustable)
147 1/2" (3748mm) / 137 1/2" (3494mm)
C
Overall Width
131 3/4" (3347mm)
D
Drive-Thru Clearance
98 3/8" (2499mm)
E
Floor to Overhead Switch
140 1/2" (3568mm)/ 130 1/2" (3314mm)
F
Short Arm Reach
21 3/4"-39 1/4" (553mm-998mm)
G
Long Arm Reach
38 1/4"-55 3/8" (971mm-1407mm)
H
Screw Pad Height
4 1/4"-7 3/4" (109mm-199mm)
K
Inside of Columns
110 1/4" (2800mm)
Lifting Capacity *
10,000 lbs. (4536 kg)
Ceiling Height Required
149" (3785mm)
Motor
2HP, Single Phase, 60Hz
Voltage 208-230
Speed of Rise **
52 seconds
Max Load Per Arm
2500 lbs (1134 kg)
* Lift capacity ratings are based on loads equally distributed on all four arms.
** Lifting and lowering speeds may vary depending on the weight of the vehicle.
Fig 1a - General Specifications
Fig1b - Service Bay Lay
out
