GMC200 Media Converter System User Guide
53
5.10 Reset Command
After typing “reset’ in the command line, the following interactive page will
appear in the console. You have to confirm the reset action by typing “y”, any
other character will lead to end the “reset” command. The “reset” command is
used to reset the management software and change all the setting back to the
factory default. After “reset” command, you shall reboot the chassis in order to
bring the default setting into effect.
5.11 Reboot Command
After typing “reboot’ in the command line, the following interactive page
will appear in the console. You have to confirm the reboot action by typing “y”,
