GMC200 Media Converter System User Guide
43
5 Command Line Interface (CLI)
GMC200 management software also provides a command line interface
(CLI) to manage and monitor the system. You can follow the console setting
information listed below and use the Windows HyperTerminal or other type of
serial terminal emulation program to perform the system management. You
can also invoke the CLI using telnet utility from any computer, which has
Ethernet connection to the network management card.
COM Properties
•
Bits per second = 57600
•
Data bits = 8
•
Parity bit = None
•
Stop bits = 1
•
Flow control - None
ASCII Setup
•
Append line feeds to incoming line ends
•
Wrap lines that exceed terminal width.
5.1 Main Command Menu
Having setup the terminal at the PC side and connected the terminal to
GMC200 network management card via straight through DB9 cable, you can
start the network management by typing “menu” at the terminal side , then
you will be asked to type the user name and password, as shown below, in
order to login to the management windows.
With the correct user name and password from one of the three login
accounts, the command line management window as shown in the following
