GMC200 Media Converter System User Guide
23
3.4 SNMP Configurations
Simple Network Management Protocol (SNMP) is the standard for
network management that uses a common software agent to manage local
and wide area network equipment from different vendors; part of the
Transmission Control Protocol/Internet Protocol (TCP/IP) suite and defined in
RFC1157. SNMPv1 is version one, or the original standard protocol. GMC200
management system supports SNMPv1.
You can configure SNMPv1 read/write and read-only community strings,
enable or disable trap mode settings.
3.4.1 SNMP Configurations
The configuration of the SNMP community string and trap mode can be
shown by clicking “Community Configuration” under the “SNMP
Configurations” page as captured below. You can configure the IP address
and community string for a new SNMP trap receiver, view a table of existing
SNMP trap receiver configurations, or delete an existing SNMP trap receiver
configuration(s).
