GMC200 Media Converter System User Guide
49
5.4 Select a Chassis
As single management unit of GMC200 can manage up to four chassis,
you must select a chassis at any time before you try to configure and monitor
the media converters in the chassis. The four commands used are:
•
select
master
•
select
slave1
•
select
slave2
•
select
slave3
Where the “master” refers to the chassis with DB9 connecter on the front
panel, which is connected to the management terminal. While the “slave1”,
“slave2” and “slave3” are the chassis connected via the DB9 cable on the rear
panel of the master chassis.
