GMC200 Media Converter System User Guide
16
3.2 Select Chassis
As a single GMC200 network management unit can manage up to 4
chassis, you shall select a chassis to be managed and monitored prior to any
operation. The following figure shows that all the four chassis are connected
and are powered. Here the “master” refers to the chassis with RJ45 and DB9
connecter on the front panel of the network management card, which is
connected to the management terminal via Ethernet connection. While the
“slave1”, “slave2” and “slave3” are the chassis connected via the DB9 cable
on the rear panel of the master chassis.
It is important to note that if a slave chassis is not connected or power off,
it will not appear on the selection tab as shown in the following figure.
