Important - Please read these instructions fully before operation or maintenance
4
Important - Please read these instructions fully before operation or maintenance
5
Customer Helpline
01904 727500
www.gardenservicecentre.co.uk
Customer Helpline
01904 727500
www.gardenservicecentre.co.uk
WARNING!
- Keep this operating and maintenance manual in a safe place for reference at a later date.
- Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
- Never allow children or people unfamiliar with these instructions to use the hedge trimmer. Local
regulations can restrict the age of the operator.
- Never trim while people, especially children or pets, are nearby. Keep in mind that the operator or
user is responsible for accidents or hazards occurring to other people or their property.
- This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible for
their safety.
- Do not touch the blade.
General Safety
Safety Information
-
Don’t leave the machine unattended.
Visitors and onlookers, especially children and the infirm,
should be kept at a safe distance from your workplace. Make sure that other people cannot access an
unattended machine.
-
Ensure safe tool storage.
Machines that are not in use should be stored in a dry place, high up if
possible, or they should be locked so that other people cannot gain access to them.
-
Hedge trimmer transport.
The hedge trimmer is transported with a blade protection cover. When
not in use, replace this cover to prevent accidents. Secure the machine against tilting, damage and
fuel leakage.
-
Remove tool keys, etc.
Before switching the hedge trimmer on, remove all keys, etc.
-
Always be careful and watch what you are doing.
When working, use common sense. Do not
use machinery if you are tired. Do not use the hedge trimmer under the influence of alcohol, drugs or
medicines that lower the ability to concentrate.
-
Fuel replenishment.
Before refuelling, switch off the engine. Carefully open the fuel cap so that
excess pressure can escape slowly and the fuel does not splash. The use of the trimmer results in
high temperatures. Let the machine cool down before refuelling, otherwise the fuel could ignite and
people could get burnt. When refuelling, make sure the fuel tank is not over filled, to allow room for
expansion. If the fuel leaks, it is important to wipe up any leaked fuel and clear the machine. After
refuelling, ensure the fuel cap is sufficiently tight to prevent being loosened by the vibrations when the
machine is in use.
-
Usage period and breaks.
After a longer period of usage, you might experience problems with
blood circulation in your hands due to the vibrations. The period of usage can be extended by wearing
suitable gloves and taking regular breaks. Please be aware that the time of usage is lowered by
personal dispositions to bad circulation, a low outside temperature, or a firm grip of the tool when
working.
-
Watch for damaged parts.
The machine should be carefully inspected before use. Are any of the
parts damaged? In case of slight damage, consider if the machine is still going to work safely and
without any problems. Make sure it is properly adjusted and movable parts are properly regulated. Are
any elements interlocked improperly? Is everything well installed: Are all requirements for trouble-free
operation fulfilled? Damaged protective devices, etc., must be repaired or replaced by the authorised
service centres, unless expressly stated otherwise in the manual. Faulty switches should also be
replaced in the authorised service centre. If you need to have your machine repaired, contact your
nearest store.
- Make sure that the protective cover of the hedge trimmer works perfectly and it is installed in such a
way that the blade teeth are always covered.
- Before adjustments or machine maintenance, switch off the engine. This is valid mainly if the cutting
blade is being replaced.
- Use only approved components. During maintenance and repairs, use only identical spare parts.
Contact your authorised service centre for this purpose.
Caution!
Using different cutting blades, and other fixtures and extensions that are expressly not
recommended, can endanger people and property.
Operational Safety (continued)
Safety Information
Personal Safety
WARNING!
- Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can
kill.
- Clear the work area before each use. Remove all objects, such as rocks, broken glass, nails, wire,
or other such deris, which can be thrown or become entangled in the cutting line or blade.
- Wear Personal Protective Equipment (PPE), such as safety glasses or goggles, when operating
this unit.
- Wear heavy, long trousers, boots, and gloves. Do not wear loose fitting clothing, shorts, or go
barefoot. Do not wear jewellery of any kind.
Operational Safety
WARNING!
-
Be careful about the environmental conditions you work under.
When starting the motor,
it will produce toxic gases. The gas can be invisible and odourless; therefore, you should never
operate the machine in an enclosed or poorly ventilated area.
-
When trimming, ensure that the area is well lit.
If you are trimming when it is raining, snowing
or freezing on slopes, or on uneven terrain, make sure you have a stable position.
