15
Customer Helpline
0151 649 1500
Step 6 (continued)
Assembly
CAUTION!
The saw chain will stretch after as little as five cuts following initial tensioning. Refer to the
operation and maintenance manual for instructions on adjusting the saw chain tension.
CAUTION
! It is essential that the correct saw chain tension is maintained. This will ensure that the saw
chain
D
, drive sprocket, guide bar
C
and engine do not wear prematurely.
The saw chain
D
must be correctly tensioned before it is used for the first time.
When the guide bar fastening nuts have been loosened, using a screwdriver or the multi tool blade,
turn the tension adjustment screw
clockwise or anti-clockwise to adjust the saw chain tension.
•
Turn the tension adjustment screw
anticlockwise to decrease the tension.
•
Turn the tension adjustment screw
clockwise to increase the tension.
The saw chain
D
must fit snugly all the way around the guide bar
C
as shown.
Using a gloved hand, ensure the saw chain
D
is free to move. If the saw chain
D
does not move,
decrease the tension.
NOTE!
Re-tighten the guide bar fastening nuts.
NOTE!
Always check the saw chain tension before attempting to operate the chainsaw.
NOTE!
Proper tension of the the saw chain is extremely important and must be checked before
starting, as well as during any cutting operation. Taking the time to make needed adjustments to
the saw chain will result in improved cutting performance and prolonged chain life
