background image

  

5

  

Customer Helpline 

0151 649 1500

WARNING

! Always take care when removing the packaging to prevent damage to yourself or to 

the chainsaw. 

IMPORTANT

! Before assembling the chainsaw, check all the parts indicated in the manual are in

the box. Inspect all the parts for signs of damage. Do not assemble the chainsaw if you observe any 
damaged components.
1.  Remove all parts of the chainsaw from the box and carefully remove all packaging. Take care not 

to lose any instructions which may be affixed to the parts. These provide important information 
which will be required while assembling the chainsaw.

2.   Keep all packaging until the chainsaw is fully assembled and has been operated successfully.

NOTE

! Always recycle the packaging in accordance with local recycling schemes.

1a. Remove the guide bar fastening nuts

IMPORTANT

! Take care when removing the guide bar fastening nuts not to lose the information 

label. This provides important information relating to the fitting of the saw chain.
Using the supplied multi tool, unscrew the two guide bar fastening nuts 

Preparing to assemble the chainsaw

Assembly

Step 1

1a

Summary of Contents for AQP-PC 4645

















Reviews: