![background image](http://html1.mh-extra.com/html/qualcast/aqp-pc-4645/aqp-pc-4645_assembly-manual_3381358014.webp)
14
Customer Helpline
0151 649 1500
IMPORTANT
! Do not fully tighten the guide bar fastening nuts
J
. They must remain loose enough to
allow the position of the guide bar
C
to be adjusted in the following step.
Align the holes in the chain brake lever assembly
B
with the location pins
K
.
Push the chain brake lever assembly
B
fully against the main body
.
NOTE
! If the chain brake lever assembly
B
proves difficult to fit, check the alignment of the
tensioning bar
N
(see step 5a) with the lower slot
S
in the guide bar
C
. If necessary, adjust the
position of the tensioning bar
N
with the tension adjustment screw
.
Refit the two guide bar fastening nuts
J
onto the location pins
K
and tighten by hand.
6a. Adjusting the saw chain tension
WARNING!
Always wear suitable gloves when assembling or maintaining the saw chain.
Step 5 (continued)
Assembly
Step 6
P
6a